简介

Remove the access door to replace RAM chips and remove your front bezel.

配件

无需配件。

  1. Loosen the two captive Phillips screws securing the access door to the iMac.
    • Loosen the two captive Phillips screws securing the access door to the iMac.

    • Remove the access door from the iMac.

    • Before beginning the repair, unplug the computer and press and hold the power switch for 20-30 seconds, to discharge internal capacitors.

    That is a really, really unnecessarily complex way of fitting a new hard drive. Thanks, but no thanks...

    annax - 回复

    Quote from annax:

    That is a really, really unnecessarily complex way of fitting a new hard drive. Thanks, but no thanks...

    annax, if you can suggest a simpler way we're all ears!

    Jake Simmonds - 回复

    I found this guide to be very useful. The installation was super easy, especially since I've never opened my iMac before. I was able to skip steps 6, 7, 9, 10 and 14. Wish I had one of those long skinny magnetic torx screwdriver's though. I had to use duct tape to hold the screws on the end of the bit for step 12.

    I used this opportunity to vacuum out the dust with mini attachments. Much needed after 3 years ;0)

    Awesome site!!! Thanks for sharing your knowledge and saving me time and $$$!

    Eric Patten - 回复

    Yes I did it! thanks for this very good manual

    Philippe d Anfray - 回复

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 9

总计 6,284