跳转到主内容

iMac G5 20" Model A1076 RAM Replacement

你所需要的

  1. iMac G5 20" Model A1076 RAM Replacement, Rear Panel: 步骤 1 中的图像 1,1
    • Lay the iMac display-side down on a flat surface.

    • Loosen the three Phillips screws securing the rear panel to the iMac.

    • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

    Some models (with light sensor) have only the two outboard screws.

    Robert Huber - 回复

  2. iMac G5 20" Model A1076 RAM Replacement: 步骤 2 中的图像 1,2 iMac G5 20" Model A1076 RAM Replacement: 步骤 2 中的图像 2,2
    • Lift the rear panel slightly near the bottom of the iMac.

    • Pull the rear panel toward yourself and remove it from the iMac.

  3. iMac G5 20" Model A1076 RAM Replacement, RAM: 步骤 3 中的图像 1,2 iMac G5 20" Model A1076 RAM Replacement, RAM: 步骤 3 中的图像 2,2
    • Rotate each of the two RAM retaining arms away from the RAM chip.

    • Pull the RAM chip straight away from its socket.

    • Repeat this process for the other RAM chip.

    • Be sure the RAM arms are rotated fully outward before installing new RAM chips.

结论

To reassemble your device, follow these instructions in reverse order.

31等其他人完成本指南。

2条评论

como se llama la cajita blanca que esta debajo de las memorias y que funcion tiene?

max sanchez - 回复

Easy as pie, instructions were right to the point, thank you.

Hemi Andersen - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 22

总计 23,239