修复你的物品 社区 商店

iMac G5 20" Model A1076 Fan Duct Replacement

简介

The fan duct directs air across the heat sink on the logic board.

你所需要的

  1. iMac G5 20" Model A1076 Fan Duct Replacement, Rear Panel: 步骤 1 中的图像 1，1

    • Lay the iMac display-side down on a flat surface (putting a cloth under the screen to protect it from bumps).

    • Loosen the three Phillips screws securing the rear panel to the iMac.

    • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

    编辑

  2. iMac G5 20" Model A1076 Fan Duct Replacement: 步骤 2 中的图像 1，2 iMac G5 20" Model A1076 Fan Duct Replacement: 步骤 2 中的图像 2，2

    • Lift the rear panel slightly near the bottom of the iMac.

    • Pull the rear panel toward yourself and remove it from the iMac.

    编辑

  4. iMac G5 20" Model A1076 Fan Duct Replacement, Fan Duct: 步骤 3 中的图像 1，1

    • Remove the following two screws:

    • One 11 mm T10 Torx.

    • One 10.6 mm T8 Torx.

    编辑

  5. iMac G5 20" Model A1076 Fan Duct Replacement: 步骤 4 中的图像 1，1

    • Lift the fan duct out of the chassis.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 9

总计 9,177