跳转到主内容

iMac G5 17" Model A1058 Optical Drive Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. iMac G5 17" Model A1058 Optical Drive Replacement, Optical Drive: 步骤 1 中的图像 1,1
    • Remove the three 8 mm brass Phillips screws securing the optical drive to the midplane.

  2. iMac G5 17" Model A1058 Optical Drive Replacement: 步骤 2 中的图像 1,3 iMac G5 17" Model A1058 Optical Drive Replacement: 步骤 2 中的图像 2,3 iMac G5 17" Model A1058 Optical Drive Replacement: 步骤 2 中的图像 3,3
    • Lift the optical drive near the connector to separate it from the logic board.

    • Lift the free end of the optical drive just enough to clear the fan cover. Lifting the free end of the optical drive too far may break the plastic positioning pins off the front bezel.

    • Lift the free end of the optical drive slightly, then pull it away from the edge of the rear case to clear the two plastic positioning pins.

    • Lift the optical drive out of your iMac.

    • When reinstalling your optical drive it may be necessary to set the bezel attached to the open end of the drive on the plastic positioning pins molded into the front bezel of the iMac and pull the connector side of the drive toward the edge of the rear case, bending it outward slightly, to properly seat the connector.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 799