修复你的物品 社区 商店

iMac G5 17" Model A1058 Hard Drive Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

Upgrade your hard drive for an instant increase in storage space.

你所需要的

  1. iMac G5 17" Model A1058 Hard Drive Replacement, Rear Panel: 步骤 1 中的图像 1，1

    • Lay the iMac display-side down on a flat surface.

    • Loosen the three Phillips screws securing the rear panel to the iMac.

    • These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

    翻译

  2. iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 2 中的图像 1，3 iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 2 中的图像 2，3 iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 2 中的图像 3，3

    • Lift the rear panel slightly from the bottom edge of the iMac.

    • Pull the rear panel toward yourself and remove it from the iMac.

    翻译

  3. iMac G5 17" Model A1058 Hard Drive Replacement, Fan Cover: 步骤 3 中的图像 1，2 iMac G5 17" Model A1058 Hard Drive Replacement, Fan Cover: 步骤 3 中的图像 2，2

    • Remove the two Phillips screws securing the fan cover to the midplane.

    • The shouldered screw belongs in the lower left corner of the fan cover.

    • Lift the fan cover up off midplane.

    翻译

  5. iMac G5 17" Model A1058 Hard Drive Replacement, Hard Drive: 步骤 4 中的图像 1，1

    • Disconnect the hard drive thermal sensor cable from the hard drive thermal sensor.

    • During reassembly, plug in the hard drive thermal sensor before lowering your new hard drive into the midplane.

    翻译

  6. iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 5 中的图像 1，2 iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 5 中的图像 2，2

    • Remove the three Phillips screws securing the hard drive to the midplane.

    • Lift the hard drive from its right edge and maneuver it out of the midplane.

    • The hard drive is still connected to the motherboard.

    翻译

  7. iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 6 中的图像 1，2 iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 6 中的图像 2，2

    • Insert the flat end of a spudger between the SATA power cable connector and the body of the hard drive.

    • Twist the spudger counter-clockwise to slightly separate the SATA power cable connector from its socket on the hard drive.

    • Pull the SATA power cable connector away from the hard drive.

    翻译

  8. iMac G5 17" Model A1058 Hard Drive Replacement: 步骤 7 中的图像 1，1

    • Pull the SATA data cable connector away from the hard drive.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,732