跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement

你所需要的

  1. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate: 步骤 1 中的图像 1,1
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 步骤 2 中的图像 1,1
    • Loosen the four Phillips #0 screws.

  3. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 步骤 3 中的图像 1,1
    • Carefully remove the base access panel.

  4. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate Housing: 步骤 4 中的图像 1,2 iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate Housing: 步骤 4 中的图像 2,2
    • Remove the four 25mm T-15 screws.

  5. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 步骤 5 中的图像 1,2 iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 步骤 5 中的图像 2,2
    • Open the housing plate.

    • Be gentle with the wires still connected to the logic board so as not to ruin the cables.

    • A fixed plug connector between the logic board and upper unit will cause some resistance. Pull gently but firmly.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Justin

于10/05/11注册

303 声望

创作了3篇指南

团队

Cal Poly, Team 21-22, Maness Fall 2011 Cal Poly, Team 21-22, Maness Fall 2011 的会员

CPSU-MANESS-F11S21G22

4 名成员

创作了13篇指南

一条评论

If you do this - don't you still need to apply a fresh coat of thermal paste to the exposed ends of the two heat-sink posts (that separate when you open a G4 flatpanel this far) - my understanding was that the machine would overheat and you'd be left with didley squat!!

Gregg :O)

amicuset - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 11

总计 2,138