修复你的物品 社区 商店

iHome iP1 Back Cover Replacement

简介

Use this guide to remove your iHome iP1's back cover. This cover is located on the underside of the platorm connecting the speakers. Although it serves no function other than to protect the motherboard, it is necessary to remove in order to remove many other components of the iHome iP1, such as the speakers and the 30-pin connector.

你所需要的

  1. iHome iP1 Back Cover Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Orient the iHome upside down with the speakers facing away from you.

    编辑

  3. iHome iP1 Back Cover Replacement: 步骤 2 中的图像 1，2 iHome iP1 Back Cover Replacement: 步骤 2 中的图像 2，2

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    编辑

  4. iHome iP1 Back Cover Replacement: 步骤 3 中的图像 1，1

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Wen Sullivan

于10/06/16注册

518 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 20-1, Livingston Fall 2016 Cal Poly, Team 20-1, Livingston Fall 2016 的会员

CPSU-LIVINGSTON-F16S20G1

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 6

总计 214