修复你的物品 社区 商店

iHome iH5 Speakers Replacement

简介

This is a replacement guide for the speaker on an iHome iH5.

你所需要的

  1. iHome iH5 Speakers Replacement, Speakers: 步骤 1 中的图像 1，1

    • Unscrew the bottom of the iHome at the marked points with a #2 phillips

    编辑

  2. iHome iH5 Speakers Replacement: 步骤 2 中的图像 1，1

    • Remove wires from the logic board (tweezers or pliers are helpful)

    编辑

  4. iHome iH5 Speakers Replacement: 步骤 3 中的图像 1，1

    • Unscrew at the marked points with #2 Phillips screwdriver.

    编辑

  5. iHome iH5 Speakers Replacement: 步骤 4 中的图像 1，2 iHome iH5 Speakers Replacement: 步骤 4 中的图像 2，2

    • Flip the board over.

    • There are capacitors all over the back side of the board. Be careful not to touch these capacitors (blue cylinders) as they can discharge—giving you a shock.

    • Unplug the eight wires for the board with tweezers. If they're tight pliers can be used instead.

    • There is one in the orange box.

    • There are two in the yellow box.

    • The are five in the green box.

    编辑

  6. iHome iH5 Speakers Replacement: 步骤 5 中的图像 1，3 iHome iH5 Speakers Replacement: 步骤 5 中的图像 2，3 iHome iH5 Speakers Replacement: 步骤 5 中的图像 3，3

    • Remove the two screws with a #2 Phillips screwdriver.

    • Flip the device on its front then remove the two screws with a #2 Phillips screwdriver.

    • Grab the speaker and pull it up until it looks like the speaker on the right. Then pull is straight back like shown with the speaker on the left.

    编辑

  7. iHome iH5 Speakers Replacement: 步骤 6 中的图像 1，1

    • Remove the four screws with a #2 Phillips screwdriver.

    • Replace the broken speaker.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Maggie Hill

于03/20/14注册

379 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

New Mexico State, Team 1-6, Easley Spring 2014 New Mexico State, Team 1-6, Easley Spring 2014 的会员

NMSU-EASLEY-S14S1G6

5 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 6

总计 690