修复你的物品 社区 商店

iDevices iGrill Power Delivery Wires and Springs Replacement

简介

The components that deliver the power from the batteries to the circuit might need to be replaced in case your device is still not operating after replacing batteries. Here you will learn how to replace the power delivery cables and springs.

你所需要的

  1. iDevices iGrill Power Delivery Wires and Springs Replacement, Power Delivery Wires and Springs: 步骤 1 中的图像 1，1

    • Place the front screen of the device on a flat surface, this allows access to the back cover. Remove the back cover from the device to access the batteries.

    编辑

  2. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 2 中的图像 1，1

    • Remove the batteries from the device, allowing you to access the screws necessary for removal of the back panel.

    编辑

  3. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 3 中的图像 1，2 iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 3 中的图像 2，2

    • Remove five black 10 mm Phillips #0 screws from the back side of the device.

    • Remove two silver-colored 5 mm Phillips screws from the left side of the internal cover.

    编辑

  5. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 4 中的图像 1，1

    • Gently and slowly pull the back cover off of the iGrill, exposing the power cables to the motherboard.

    编辑

  6. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 5 中的图像 1，2 iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 5 中的图像 2，2

    • Gently pull the metal terminals to the batteries out of their plastic holders.

    • Position the metal terminals such that you will be able to pull the plastic component that holds the batteries away from the motherboard.

    • Remove the internal cover from the device.

    编辑

  7. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 6 中的图像 1，1

    • After you have peeled back the rear plastic covering, you will have access to the motherboard.

    编辑

  8. iDevices iGrill Power Delivery Wires and Springs Replacement: 步骤 7 中的图像 1，1

    • From here, you will have access to both the metal terminals of the power transfer wires and the soldering points of the power transfer wires to the motherboard.

    • If any of these connections have been broken, repair them with a solder and soldering wire.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Kyle McElyea

于02/16/16注册

259 声望

创作了2篇指南

徽章: 12

+ 9更多徽章

团队

IUPUI, Team 3-4, Harley Spring 2016 IUPUI, Team 3-4, Harley Spring 2016 的会员

IUPUI-HARLEY-S16S3G4

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 259