修复你的物品 社区 商店

iDea USA CT702 Battery Replacement

简介

This simple task of replacing the battery will lengthen the lifespan of the charge on the iDeaUSA CT702.

你所需要的

  1. iDea USA CT702 Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Face the tablet with portholes facing you.

    编辑

  2. iDea USA CT702 Battery Replacement: 步骤 2 中的图像 1，1

    • Use a fingernail or a plastic opening tool to gently pry the black panel around the portholes.

    • Be gentle and take your time.

    编辑

  3. iDea USA CT702 Battery Replacement: 步骤 3 中的图像 1，3 iDea USA CT702 Battery Replacement: 步骤 3 中的图像 2，3 iDea USA CT702 Battery Replacement: 步骤 3 中的图像 3，3

    • Use your fingers to remove the rest of the back. Slowly apply pressure from each side to detach each clip connection.

    编辑

  4. iDea USA CT702 Battery Replacement: 步骤 4 中的图像 1，2 iDea USA CT702 Battery Replacement: 步骤 4 中的图像 2，2

    • Separate the battery from the device.

    • Slowly use your thumb and forefingers to pry open each corner.

    • Be aware of the adhesive on the bottom of the battery. Remove with care to keep battery intact.

    编辑

  6. iDea USA CT702 Battery Replacement: 步骤 5 中的图像 1，1

    • Carefully peel off tape around the top of the battery.

    • Slowly use your fingernail to lift the tape off of the battery. Dispose of the tape or save it for reuse.

    编辑

  7. iDea USA CT702 Battery Replacement: 步骤 6 中的图像 1，3 iDea USA CT702 Battery Replacement: 步骤 6 中的图像 2，3 iDea USA CT702 Battery Replacement: 步骤 6 中的图像 3，3

    • Disconnect the battery using the soldering iron.

    • Remember to use proper safety precautions when soldering. Solder from the side and do not breathe the smoke in.

    • Make sure the soldering iron is on the highest heat for 5 minutes before starting.

    • Start with the red wire, and gently touch the tip of the iron onto the connection.

    • Move to the yellow wire after the red.

    • Move to the black wire after the yellow.

    编辑

  8. iDea USA CT702 Battery Replacement: 步骤 7 中的图像 1，1

    • Remove the battery completely. Dispose of the defective battery properly at a recycling center.

    编辑

  9. iDea USA CT702 Battery Replacement: 步骤 8 中的图像 1，1

    • Put the new battery in place

    • Make sure the corners are inside of the white shell.

    编辑

  10. iDea USA CT702 Battery Replacement: 步骤 9 中的图像 1，2 iDea USA CT702 Battery Replacement: 步骤 9 中的图像 2，2

    • Solder the new battery.

    • Start with the black wire and solder to the nearest connection.

    • Move to the yellow wire and solder to the middle connection.

    • End with the red wire and solder to the farthest connection away.

    编辑

  11. iDea USA CT702 Battery Replacement: 步骤 10 中的图像 1，2 iDea USA CT702 Battery Replacement: 步骤 10 中的图像 2，2

    • Re-tape the battery at the top.

    • Make sure the solder has cooled before taping.

    • Tape the corners in place, onto the shell.

    • To replace back cover, follow the first three steps in reverse order.

    编辑
结论

To reassemble your device, Start from step 9 and work backwards.

作者

与7其他贡献者

Benton Gray

于03/11/15注册

201 声望

创作了2篇指南

徽章: 3

团队

Colorado Springs, Team 4-7, Panko Spring 2015 Colorado Springs, Team 4-7, Panko Spring 2015 的会员

UCCS-PANKO-S15S4G7

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 602