菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

iBook G4 14" 933 MHz-1.33 GHz LCD Cover Replacement

撰写者： Andrew Bookholt (和另外2个贡献者)
  • 评论： 0
  • 收藏 0

难度

中等

步骤

5

所需时间

建议一个时间??

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

简介

This is an internal prerequisite guide that should remain unpublished.

工具

购买这些工具

配件

没有特定配件。

  1. Remove the pieces of readily removable tape from around the perimeter of the display. Carefully remove the aluminum tape covering the display data cable connection.

    • Remove the pieces of readily removable tape from around the perimeter of the display.

    • Carefully remove the aluminum tape covering the display data cable connection.

    翻译

  2. Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display. Use the tip of a spudger to remove the small washer under the screw you just removed.

    • Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display.

    • Use the tip of a spudger to remove the small washer under the screw you just removed.

    翻译

  4. Peel the aluminum/EMI tape off the cast aluminum frame of the clutch hinges.

    • Peel the aluminum/EMI tape off the cast aluminum frame of the clutch hinges.

    • It is not necessary to peel the tape off the thin steel LCD cover.

    翻译

  5. Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total). Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).

    • Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).

    翻译

  6. Lift the thin steel LCD cover off the LCD.

    • Lift the thin steel LCD cover off the LCD.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 407