修复你的物品 社区 商店

iBook G4 14" 1.42 GHz Rear Display Bezel Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

Internal Prerequisite.

你所需要的

  1. iBook G4 14" 1.42 GHz Rear Display Bezel Replacement, Rear Display Bezel: 步骤 1 中的图像 1，1

    • Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

    • If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

    翻译

  2. iBook G4 14" 1.42 GHz Rear Display Bezel Replacement: 步骤 2 中的图像 1，1

    • Use your thumbs to slightly separate the rear bezel from the front bezel.

    • It is helpful to hold the opposing corner of the display stationary to aid in flexing the rear bezel away from the display.

    翻译

  4. iBook G4 14" 1.42 GHz Rear Display Bezel Replacement: 步骤 3 中的图像 1，3 iBook G4 14" 1.42 GHz Rear Display Bezel Replacement: 步骤 3 中的图像 2，3 iBook G4 14" 1.42 GHz Rear Display Bezel Replacement: 步骤 3 中的图像 3，3

    • Insert the flat end of a spudger into the gap between the front and rear bezels.

    • Rotate your spudger until it is parallel to the front face of the display.

    • Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips.

    翻译

  5. iBook G4 14" 1.42 GHz Rear Display Bezel Replacement: 步骤 4 中的图像 1，1

    • Lift the rear bezel off the display.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 252