简介

Install an Airport Extreme 802.11g card internally.

Use a coin to rotate the battery locking screw 90 degrees clockwise.
  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

添加评论

Lift the battery out of the computer.
  • Lift the battery out of the computer.

添加评论

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

  • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

添加评论

Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.
  • Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.

添加评论

Grasp the clear plastic tab on the AirPort card and pull toward the display.
  • Grasp the clear plastic tab on the AirPort card and pull toward the display.

添加评论

Hold the Airport card in one hand and use your other hand to remove the antenna cable.
  • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

21等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了750篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 12

总计 29,233