跳转到主内容

iBook G4 12" 1.33 GHz Keyboard Replacement

你所需要的

  1. iBook G4 12" 1.33 GHz Keyboard Replacement, Battery: 步骤 1 中的图像 1,2 iBook G4 12" 1.33 GHz Keyboard Replacement, Battery: 步骤 1 中的图像 2,2
    • Lay your iBook upside down on a flat surface.

    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

  2. iBook G4 12" 1.33 GHz Keyboard Replacement, Keyboard: 步骤 2 中的图像 1,2 iBook G4 12" 1.33 GHz Keyboard Replacement, Keyboard: 步骤 2 中的图像 2,2
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

  3. iBook G4 12" 1.33 GHz Keyboard Replacement: 步骤 3 中的图像 1,1
    • Remove the four silver Phillips screws that secure the RAM shield.

  4. iBook G4 12" 1.33 GHz Keyboard Replacement: 步骤 4 中的图像 1,1
    • Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.

    • Make sure that you reconnect the keyboard cable before replacing the RAM shield.

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

附加文件

一条评论

The screw is stripped. What should I do?

TheYootz Media Group - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 2

过去 30 天: 8

总计 10,257