跳转到主内容
帮助

Disassembling Nintendo DSi Bottom case

编辑中

编辑中

本指南正在编辑中。定期刷新以查看最新更改 !

已存档的指南

已存档的指南

本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

不正确的工具

不正确的工具

通过在图片或文字中使用正确的工具来帮助完善该指南

缺失步骤

缺失步骤

糟糕!本指南目前缺少一些重要的步骤。

  • 作者: rjcamero
  • 估计时间: 45分钟 - 1小时
  • 难度: 中等

This guide has been updated by iFixit staff! Read the new, official guide here.

A guide on how to disassemble the bottom case assembly, including removing the LCD and buttons.

步骤 1 Disassembling Nintendo DSi Bottom case  ¶ 

Remove the rubber front-panel button membranes from the device. Pay careful attention to where the buttons go, so you can replace them correctly.

步骤 1 Disassembling Nintendo DSi Bottom case  ¶ 

  • Remove the rubber front-panel button membranes from the device. Pay careful attention to where the buttons go, so you can replace them correctly.

  • A/B/X/Y button assembly

  • Select/Start button assembly

  • D-pad

  • Power button

步骤 2  ¶ 

Remove the plastic buttons and keep them in a safe place. All of the buttons have "key" notches to prevent them from being inserted incorrectly (backwards or in the wrong place), but it can take a while to figure out where everything goes if they get shuffled around.

步骤 2  ¶ 

  • Remove the plastic buttons and keep them in a safe place.

  • All of the buttons have "key" notches to prevent them from being inserted incorrectly (backwards or in the wrong place), but it can take a while to figure out where everything goes if they get shuffled around.

步骤 3  ¶ 

Flip the case open, and push the lower screen assembly out of the frame. Flip the case open, and push the lower screen assembly out of the frame.

步骤 3  ¶ 

  • Flip the case open, and push the lower screen assembly out of the frame.