注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 1
步骤 1
-
Using a Phillips #000 screwdriver, remove the four 2-mm screws from the side of the camera.
-
Remove the two 3-mm screws from the other side of the camera.
-
Finally, remove the three 4-mm screws from the bottom of the camera.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。