Cisco 878 Integrated Services Router Top Cover Disassembly

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。

下一步

正翻译步骤 1

英语

中文

步骤 1

Remove the two screws on back side

Only trained and qualified personnel should be allowed to install, replace, or service this equipment!
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself!
Make sure that the power switch is turned to standby and that the power supply cable is disconnected. Disconnect all cables from the router back panel.
Use the Phillips #1 Screwdriver to remove the two screws on back side of the device.