注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 3
步骤 3
-
Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
-
Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。