注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 9
步骤 9
-
Insert the tip of the flat head screwdriver between the panel and the metal clip then gently push down until the clip is slightly bent away from the panel.
-
Do this for all the clips holding the panel down.
-
After all clips are bent away, remove the panel.
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。