修复你的物品 社区 商店

iPhone 5s 前面板组件更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的32指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 9

步骤 9
iPhone 5s Front Panel Assembly Replacement, Removing the Touch ID cable bracket: 步骤 0 中的图像 1，3 iPhone 5s Front Panel Assembly Replacement, Removing the Touch ID cable bracket: 步骤 0 中的图像 2，3 iPhone 5s Front Panel Assembly Replacement, Removing the Touch ID cable bracket: 步骤 0 中的图像 3，3
Removing the Touch ID cable bracket

  • Open the phone just enough to reveal the metal bracket covering the home button cable.

  • Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. Keep the cable loose—if it is stretched taut, that's too far.

  • Only the phone's original home button assembly will be capable of using the Touch ID functionality. If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.

  • Use the tip of a spudger to push the bracket free and remove it with tweezers.

  • The next two steps apply to reassembly. Skip them and continue to Step 12 until reassembly.

移除Touch ID电线支架

稍微打开屏幕，可以看到盖住home键电线的挡板铁片就可以了。

千万不要把屏幕和机身分得太开，因为有一些电线依然连接着屏幕和机身，分得太开会损坏home键电线或及其接口。保持电线是松的状态——如果电线拉紧了，那么就说明分得太开。

只有手机原装的Home键组件才能使用Touch ID功能。如果你扯断这根电线，装上新的home键只能恢复home键功能，而将失去Touch ID功能。

使用手机撬棒推动松下铁片，再用镊子取下来。

接下来两步仅适用于重新组装。如不是重组，可以直接跳到第12步。

[title] Removing the Touch ID cable bracket
[* black] Open the phone just enough to reveal the metal bracket covering the home button cable.
[* icon_caution] Do not open the phone too far or you risk damaging the home button cable, or the socket it plugs into. ***Keep the cable loose—if it is stretched taut, that's too far.***
[* black] Only the phone's original home button assembly will be capable of using the Touch ID functionality. ***If you rip the cable, installing a new home button will only restore ordinary home button functions, not the Touch ID features.***
-[* black] Use the tip of a spudger to push the bracket free and remove it with tweezers.
+[* black] Use the tip of a spudger to push the bracket free and remove it with [product|IF145-020|tweezers].
[* icon_note] The next two steps apply to reassembly. Skip them and continue to Step 12 until reassembly.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。