注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 8
步骤 8
-
Remove any covering on the microphone (this one does not have a covering).
-
Slide the slotted side (shown facing up) onto the microphone. It may help to hold the microphone cover steady by inserting tweezers into the hole on the bottom.
-
Fold the microphone up so that it points out, as shown.
| + | [* black] Remove any covering on the microphone (this one does not have a covering). |
|---|---|
| + | [* black] Slide the slotted side (shown facing up) onto the microphone. It may help to hold the microphone cover steady by inserting tweezers into the hole on the bottom. |
| + | [* black] Fold the microphone up so that it points out, as shown. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。