Canon Speedlight 430EX II LCD Replacement

英语

中文

上一步下一步

正翻译步骤 9

步骤 9

Canon Speedlight 430EX II LCD Replacement, Re-assemble and Test: 步骤 0 中的图像 1，3

Canon Speedlight 430EX II LCD Replacement, Re-assemble and Test: 步骤 0 中的图像 2，3

Canon Speedlight 430EX II LCD Replacement, Re-assemble and Test: 步骤 0 中的图像 3，3

Re-assemble and Test

Place circuit board back into the casing and attach all screws.
If positioned correctly the rubber band will make connection between the new LCD and the board.
Push the wires back between the side casing and the circuit board. The order is now reversed: 1st Black, 2nd Orange, 3rd White.
Re-attach all connectors onto the circuit board except the flash base.
Insert batteries and hold the cap closed with your fingers. It will not snap closed until the casing is back together.
Turn on the flash and check if the LCD works. Push the back-light button (above Pilot) to make sure it works.
After the test remove batteries.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。