Canon Speedlight 430EX II LCD Replacement

英语

中文

上一步下一步

正翻译步骤 7

步骤 7

Canon Speedlight 430EX II LCD Replacement, Remove old LCD: 步骤 0 中的图像 1，3

Canon Speedlight 430EX II LCD Replacement, Remove old LCD: 步骤 0 中的图像 2，3

Canon Speedlight 430EX II LCD Replacement, Remove old LCD: 步骤 0 中的图像 3，3

Remove old LCD

Remove 5 screws holding the circuit board.
Remove screw holding metal tab. The screw is different than other 5. Make sure you leave it in the tab.
Remove screw holding plastic cap. Keep screw in the cap as it is a different size.
Take the circuit board out of the casing flipping it over.
There is a clear plastic plate (red) between the LCD and the circuit board. It might fall out. It is used to distribute the back-light.
Pull the old LCD off carefully. Make sure not to tear the rubber band (green). This is used to transfer the signals from the board to the LCD.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。