Power Mac G5 Processor and Cooling Unit Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Power Mac G5 Processor and Cooling Unit Replacement: 步骤 0 中的图像 1，3

Power Mac G5 Processor and Cooling Unit Replacement: 步骤 0 中的图像 2，3

Power Mac G5 Processor and Cooling Unit Replacement: 步骤 0 中的图像 3，3

Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.
The screws are somewhat hidden, so they cannot be see in the picture.
To visualize the location of the screws look 3 steps ahead.
The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.
The last two images show another version of the LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。