Opening Procedure

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

英语

中文

正翻译步骤 4

步骤 4

Pry up the back cover assembly

Insert the flat end of a spudger into the microphone opening at the top edge of the back cover.
Pry upwards to loosen the back cover assembly. This may require some force.
Don't try to remove the back cover assembly all the way yet. It's still connected to the daughterboard.
Swing the back cover assembly open by 45 degrees to gain access to the sensor assembly cable.