iPhone X 电池更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南。

英语

中文

正翻译步骤 9

步骤 9

Pull and remove the final adhesive strip.
The strip may fling the battery when it separates from the iPhone, so hold your hand over the battery to secure it—but don't press down on the battery itself, or the added pressure may cause the adhesive strip to break off underneath the battery.
If you removed all four adhesive strips successfully, skip the next step.
If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.
For alternative methods to unstick the battery from the case, continue to the next step below.