打开步骤

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的23指南。

英语

中文

正翻译步骤 11

步骤 11

The top edge of the display is secured with both glue and clips.
Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.
The clips will break if you use too much force. Work carefully and be patient.
Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.
Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏的顶部边缘被胶水和卡扣固定。
沿显示屏的上角滑动撬片，同时朝着Lightning端口的方向向下轻轻拉动或推动显示屏。
如果用力太大，固定显示屏的卡扣会被折断。 请小心操作！
请勿将撬片尖端插入超过 3 毫米，否则可能会损坏显示屏排线。
将撬片滑动到对角，并切掉所有剩余用来固定显示器的粘合剂。