Guitar String Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Guitar String Replacement, Thread strings through the bridge: 步骤 0 中的图像 1，3

Guitar String Replacement, Thread strings through the bridge: 步骤 0 中的图像 2，3

Guitar String Replacement, Thread strings through the bridge: 步骤 0 中的图像 3，3

Thread strings through the bridge

The first three strings (low E, A, and D), have thick and springy ends; the three thinnest strings (G, B, and high E), do not have thick or springy ends. You may use either set of strings.
Insert the thick end of the string into the top of the bridge and thread it through until about 3 to 4 inches of the string stick out of the bottom.
Wrap the short end of the string around the long end of the string, creating a loop.
Pass the short end of the string through the loop (2 or 3 times for thick strings, 3 or 4 times for thin strings). Make sure the final pass leaves the string underneath the bridge.
Pull both ends of the string until the knot is tight.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。