注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 1
步骤 1
-
Using a Phillips #00 screwdriver, remove the 3 mm screw that secures the wireless-card bracket and wireless card to the I/O board.
-
Lift the wireless-card bracket off of the wireless card.
-
Disconnect the white and black antenna cables from the wireless card.
-
Slide and remove the wireless card from the wireless card slot.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。