修复你的物品 社区 商店

微软 Surface Pro 6 打开机壳程序

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 19

步骤 19
Microsoft Surface Pro 6 Opening Procedure: 步骤 0 中的图像 1，2 Microsoft Surface Pro 6 Opening Procedure: 步骤 0 中的图像 2，2

  • Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.

  • Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

将一对尖头镊子的一个尖头插入覆盖数字转换器连接器的 EMI 屏蔽边缘的缝隙中。

使用镊子尽可能多地将 EMI 屏蔽从显示器撬开，而不要弯曲它。

在防护罩周围的不同点重复此过程，直到它松开为止。取下防护罩。

尽量不要使护罩变形太多——你需要在重新组装时重新安装它。

-[* black] Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.
+[* black] Insert one point of a pair of [product|IF145-020-2|pointed tweezers] into a gap in the edge of the EMI shield covering the digitizer connector.
[* black] Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.
[* black] Repeat this procedure at different points around the shield until it is free. Remove the shield.
[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。