注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 6
步骤 6
Remove the heatsink screws
-
Use a T3 Torx driver to remove the ten screws securing the heatsink:
-
Two 2.5 mm screws
-
Three 2.0 mm screws
-
One 3.0 mm screw
-
Two 4.1 mm screws
-
Two 3.4 mm screws
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。