注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南。
正翻译步骤 6
步骤 6
Slice through the remaining edges
-
Continue heating and slicing the remaining edges of the phone.
-
Be careful as you slice along the left edge of the phone. If your pick feels like it's stuck near the top, you may have snagged the fingerprint sensor. Retract the pick out of the seam slightly and try again.
-
Be sure to cut through the thick portions of adhesive near the bottom and right edge of the phone.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。