注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。
正翻译步骤 2
步骤 2
-
Gently lift to unstick and remove each bracket, being careful not to bend it.
-
If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the brackets is not recommended, as this may bend the spring contacts along the top.)
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。