注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。
正翻译步骤 1
步骤 1
-
Using tweezers, pinch the top of the spring located on the right side of the printhead.
-
Pull the spring up and around the hook of the carriage to remove the spring from the printhead.
-
Use the same procedure to remove the left spring.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。