注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。
正翻译步骤 1
步骤 1
-
If present, remove the piece of tape covering the end of the dock connector cable.
-
Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board.
-
Peel the dock connector ribbon cable off the rear panel.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。