跳转到主内容

修复你的物品

维修的权力

商店

简介

The motherboard is the heart and soul of any electronic device. Learn how to replace it!

  1. Remove the rubber foot pads on the bottom of the device using a plastic opening tool. Remove the rubber foot pads on the bottom of the device using a plastic opening tool.
    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

  2. Remove the six 2 mm PH0 screws on the bottom of the device. Four of those screws are located under the foot pads.
    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

  3. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物
  4. Gently remove the bottom of the device.
    • Gently remove the bottom of the device.

  5. Remove the four 1.8 mm J1 screws. Remove the two 2mm PH0 screws.
    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

  6. Gently pick up the mother board
    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

  7. Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port. Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.
    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Jacob

于2015年03月11日注册

750 信誉积分

创作了6篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 3

总计 130