跳转到主内容

跳到步骤#3

Tom Nguyen编辑

编辑已通过 由 Tom Nguyen

之前
之后
不变

步骤行

-[* black] Using your spudger tool, place the flat end in between the top portion of the rectangular orange connector and the black metal cover. Lift the connector up until it disconnects from the metal grills
+[* black] To disconnect the left ribbon cable from the motherboard, place the flat end of your spudger in between the top portion of the rectangular orange connector and the black metal cover. Lift the connector up until it disconnects from the metal grills