跳转到主内容

跳到步骤#1

Patrick编辑

编辑已通过 由 Patrick

之前
之后
不变

步骤行

-[* black] Lodge a Jimmy between the front of the screen and the side of the device.
-[* black] Slide the Jimmy around the edge of the device, disconnecting the screen from the tablet.
+[* icon_caution] Apply heat as necessary around the edges of the screen to loosen the adhesive, but be careful not to melt the plastic frame of the tablet.
+[* black] Starting on the side of the tablet near the bottom, heat the area and insert a metal jimmy or opening pick between the digitizer and the frame.
+[* black] Separate the adhesive on the bottom of the tablet first, then work up the sides. The digitizer ribbon cable is located at the top.
[* icon_caution] The screen may crack during removal, so be wary of broken glass.