跳转到主内容

跳到步骤#4

oldturkey03编辑

编辑已通过 由 oldturkey03

已删除
已添加
不变

步骤行

[* black] LCD holder removed from logic board
[* blue] disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable.
[* black] With the ribbon cable disconnected, remove the front case.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加