跳转到主内容

跳到步骤#23

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* black] Grab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* icon_reminder] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_reminder] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap.