跳转到主内容

跳到步骤#23

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* icon_reminder] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.
[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* icon_reminder] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.

图片2

没有之前的图片

已添加