跳转到主内容

跳到步骤#1

Adam O'Camb编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

+[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. ***Do not*** touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.
+[* black] Use the tip of a spudger to push each side of the power button cable connector and gently ''walk'' it out of its socket.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加