跳转到主内容

跳到步骤#2

Richard编辑

编辑已通过 由 Richard

之前
之后
不变

步骤行

-[* red] locate and remove the screws with a "T5" Screwdriver. (Screw Size: Head diameter 0.167 mm, Head height 0.062 mm, Shaft length 2.32 mm.)
-[* orange] On this model there is 7 screws on the back and 2 on the side opposite the volume and power button.
-[* black] Be sure to place the screws in a place so they will not be misplaced as they are small.
+[* red] Remove the six 2.3mm screws with a "T5" Screwdriver.
+[* orange] Remove the 2 additional 2.3mm screws from the side opposite the volume and power button.
[* icon_caution] When you open the back of the phone the camera and speaker will be attached to the part that you are removing.