跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#2

Adam Redmond编辑

编辑已通过 由 Adam Redmond

之前
之后
不变

步骤行

[* black] Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the USB port. Use a pair of tweezers to lift the port from the board.
[* icon_caution] Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns.
[* icon_note] Care should be taken while desoldering the joints as the heat could melt the plastic casing on the port. It is strongly recommended that [guide|750|soldering surface-mounted components guide] is referenced before proceeding.