跳到步骤＃8
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| + | [* black] Slide the blade of a halberd spudger into the opening on the edge of the rear button bracket. |
|---|---|
| + | [* icon_caution] Careful not to push directly against the rear button ribbon cable, to avoid damaging it. |
| + | [* icon_caution] Do not push the spudger in too far, to avoid damaging the rear button. |
| + | [* black] Continue sliding the spudger blade around the base of the bracket to cut all the adhesive holding the bracket to the rear case. |
| + | [* black] Remove the bracket. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加