跳到步骤＃2
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| + | [* black] In the following steps you will be cutting through the adhesive around the edge of the rear glass panel. |
|---|---|
| + | [* black] Areas of interest are as follows. |
| + | [* red] Areas of adhesive (in addition to the adhesive on the edge of the rear case). |
| + | [* orange] Avoid sticking the spudger blade in too far here, to avoid damaging the rear button ribbon cable and chip. |
图片1
没有之前的图片
已添加