跳转到主内容

跳到步骤#5

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

[* black] With the LCD lifted, disconnect the LCD cable by pulling down.
[* icon_caution] The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.
-[* black] Replacing this cable is the hardest part of the repair. I connect the cable then screw the board down. Note that the 2 screws holding the board down closer to the hard drive have finer threads than the other 2.
+[* icon_reminder] On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply.
+ [* black] Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply.