跳转到主内容

跳到步骤#5

Nick Lam编辑

编辑被拒绝 由 Walter Galan

之前
之后
不变

步骤行

-[* black] With the LCD lifted, disconnect the LCD cable by pulling down.
+[* black] With the LCD lifted, disconnect the LCD cable by pulling down. *** It is VERY difficult to re-connect. Try not to disconnect, but rotate the LCD panel to give room to replace the Hard disk. Otherwise, you may need to unscrew (x4) to lift up the board to re-plug the connector.
[* icon_caution] The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.
[* black] Replacing this cable is the hardest part of the repair. I connect the cable then screw the board down.