跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#10

Glenn P编辑

编辑已通过 由 David Hodson

之前
之后
不变

步骤行

[* red] Remove the eight CBnine screws labeled "CB" for the fans cover, with a flat head screwdriver. These are the 8 shown circled, plus 1 more in the central black area.
[* violet] After the CB screws are removed, leftlift up the fans covercover. It will be tethered by connecting wires to the motherboard. Some repairs can be done without untethering, just shifting the cover.
[* black] To
remove the metal panelpanel entirely (assumed below), you will have to unplug 2+ connectors from the motherboard. (More if you have a model with active external connectors like CATV, etc.) An alternative may be to detach the external-connector plate from the fans cover with the 3 screws label "IO-C", leaving just that small plate tethered.
[* icon_note] I don't have a picture of this panelfans cover. Just be aware it is the biggest metal panel removed.
[* red] Remove the eight CBnine screws labeled "CB" for the fans cover, with a flat head screwdriver. These are the 8 shown circled, plus 1 more in the central black area.
[* violet] After the CB screws are removed, leftlift up the fans covercover. It will be tethered by connecting wires to the motherboard. Some repairs can be done without untethering, just shifting the cover.
[* black] To
remove the metal panelpanel entirely (assumed below), you will have to unplug 2+ connectors from the motherboard. (More if you have a model with active external connectors like CATV, etc.) An alternative may be to detach the external-connector plate from the fans cover with the 3 screws label "IO-C", leaving just that small plate tethered.
[* icon_note] I don't have a picture of this panelfans cover. Just be aware it is the biggest metal panel removed.