跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#14

trnudell编辑

编辑已通过 由 David Hodson

之前
之后
不变

步骤行

[* black] PrepRemove the top layer of sticky black tape, then prep the LCD assembly and new touchscreen/digitizer with adhesive. Usingnew adhesive--I just used thin strips of two-sided tape.
[* black] Using
a microfiber cloth remove any dust from the LCD display.
[* black] PrepRemove the top layer of sticky black tape, then prep the LCD assembly and new touchscreen/digitizer with adhesive. Usingnew adhesive--I just used thin strips of two-sided tape.
[* black] Using
a microfiber cloth remove any dust from the LCD display.
[* red] Slide the new touchscreen/digitizer cable between the frame and LCD display.
[* icon_caution] Be VERY careful with the touchscreen/digitizer cable! If needed, it is ok to lightly and carefully push against the backside of the LCD to create more space.
[* red] Once the cable is through go ahead and remove all paper from adhesives and set the screen in place.
[* black] Now you can begin reconstructing your phone. Go ahead and go through the steps backwards.